Technical Specification
Company Strength
Original manufacturer of image intensifier TV system and x- ray machine accessories for more than 16 years. √ Customers could find all kinds of x-ray machine parts here. √ Offer on line technological support. √ Promise super product quality with best price and service. √ Support the third part inspection before delivery. √ Ensure the shortest delivery time.Packaging & Delivery
Packaging Details 1. Plywood packing ,fumigation free,safety packing for international 2. Shipment Port: Weifang, Qingdao 3. Lead Time:7-15 daysCertificate
Product Show
| Model | C2UW-LP-I DA | C2UW-LU DA | |
| Specification | Bluetooth 4.0 low energy | ||
| Frequency | 2.4GHz, area (2.402GHz to 2.480GHz) | ||
| Communication Range | About 10m (Open field) | ||
| Response Time | When the switch is pressed : Max 70msWhen the switch is released : Max 50ms | ||
| Number of Connections | Max 1 | ||
| Allowable Operating Frequency Shock | ≤60times/min | ||
| Vibration Failure | 300m/s | ||
| Shock Damage | Frequency is 10Hz to 55Hz, double amplitude 1.5mm | ||
| Mechanical Durability | Main Switch | ≥200,000 times | ≥200,000 times |
| Sub Switch | ≥200,000 times | ≥200,000 times | |
| Range of Working Temperature | 0℃ to 40℃ | ||
| Working Humidity Range | 90%RH or below ( no icing or condensation ) | ||
| Weight | About 0.1kg(with base ,no battery) | About 0.05kg | |
| Type | Picture | Model | |
| Wireless Hand Switch | Handle |  | C2UW-LP-I DA |
| Receiver |  | C2UW-LU DA | |
1.Handle (the transmitting terminal C2UW-LP-I DA) Battery: Three 7# alkaline batteries are recommended 2.Receiver (the receiving terminal C2UW-LU DA） | Power Supply | |
| Rated Voltage | 4.5V |
| Allowable voltage range | 3V-4.5V |
| Power Supply | Current Consumption | ||
| Rated Voltage | 5V-12V | Typical Value | 100mA |
| Allowable Voltage Range | 4.5V-13V DC | Max | 400mA |
3. The Transmitting Terminal | Main switch 1st step | Ready |
| Main switch 2nd step | Exposure |
| Sub switch 3rd step | Control collimater |
| Blue light | Bluetooth |
| Red light | Low voltage indicator light |
4 The Receiving Terminal | LED Light 1 (Red) | Power on indicator | The internal circuit is powered on, and when power is supplied to the receiving terminal, this LED light will light up. |
| LED Light 2 (Blue) | Bluetooth connection indicator | 1. The LED light flashes, indicating that it is not connected. 2. It flashes quickly, indicating that the Bluetooth connection is in progress. 3. Off, it means that the Bluetooth connection is successful and it is in a low-power state. |
| LED Light 3 (Green) | Main switch 1st step is turned on | SW1 |
| LED Light 4 (Green) | Main switch 2nd step is turned on | SW2 |
| LED Light 5 (Green) | Switch 3rd step is turned on | SW3 |
Note: The above values are typical values.
Main slogan
1.Size  |  |
 |  |
 |  |
Unit:mm
Recommended Batteries Steps and precautions for batteries replacement: 1.Please use three 7# alkaline batteries. Don’t use batteries other than the specified . Or it may cause malfunction or damage. 2.Install or replace batteries (1)Remove the screws using a phillips screwdriver and open the battery cover (2)Remove the battery case and install three AAA alkaline batteries (3)Return the battery case to its original position, paying attention to the positive and negative terminals (4)Install the battery cover and tighten the screwsWiring connection  |  |
