Looking for reliable high voltage cable? Look no further than our factory. We specialize in producing top-quality cable products that meet stringent standards and specifications. Trust us for your high-voltage needs.
Table 1: HV Cable Spec. Refer to HV Section Plan Diagram
Usage scenario
Company Strength
Original manufacturer of x- ray machine accessories hand switch and foot switch for more than 16 years. √ Customers could find all kinds of x-ray machine parts here. √ Offer on line technological support. √ Promise super product quality with best price and service. √ Support the third part inspection before delivery. √ Ensure the shortest delivery time
Certificate
Specification
Usage Show
Lead Time:
Quantity(Pieces)
1 - 10
11 - 20
21 - 200
>200
Est. Time(days)
3
7
15
To be negotiated
Continued Table1
The cable using temperature
-40℃~70℃.
Length
3m（customized）
Features: Applicable to X-ray machines in DC high voltage state, such as medical X-ray machines, industrial non-destructive testing equipment, DR, CT, etc. 75KV is suitable for X-ray machines with tube voltage below 150KV 90KV is suitable for X-ray machines with a tube voltage of 150KV and in motion Used to connect X-ray tube and high voltage generator. Two connection methods of straight elbow are available. Cable length can be customized. Cable accessories can be ordered separately. When the high voltage cable is used, the bending radius should not less than 66mm.Technical Features
Electrical Data
Rated Voltage
75kVdc
Shield Resistance
0.010 Ohm/m
Coverage Shielding Braid
>95%
Cable Capacity
< 120pF/m
Test Voltages
High Voltage Insulation
90kVdc
Low Voltage Insulation
500 Vac
Mechanical Data: Cable
Outer Diameter
16.5 mm + 0.5
Bending Radius
> 150mm
Low Voltage Conductor
2xl.5mm2
Common Conductor
2x0.75mm2
Conductor Resistance
0.013 Ohm/m
Cable Sheat Colour
Light grey
Mechanical Data: Plug
Multiple Contact Pin
8 point contact
Max. Temperature
110 °C
Flanges
Demountable
Extremely Short Sleeve
34 mm
Small Plug Diameter
40 mm
Solderless Connection
(EMC grounding)
Cable specifications
75/90KV Straight/elbow
75KV CA1-CA11
75/90KV Straight-CA11
picture
Conductor
nominal cross section
1.8mm²
1.8mm²
1.8mm²
Material
Tinned copper
Tinned copper
Tinned copper
Twist
Left
Left
Left
high pressure Insulation
colour
White
White
White
Material
Elastomer
Elastomer
Elastomer
Sheath
colour
grey
grey
grey
Material
PVC
PVC
PVC
thickness
1.5±0.3mm
1.5±0.3mm
1.5±0.3mm
diameter
18.5±0.5mm
14.5±0.5mm
14.5±0.5mm
Main slogan
Cable sheath appearance should be smooth, uniform diameter, with no joint, bubble, bumps and other undesirable phenomena. Weave shield density is not less than 90%. The minimum thickness of the cable insulation and sheath must be 85% more than the nominal thickness. Insulation between the core and the insulated wire, insulation between the core and the ground cable should be able to withstand the AC 1.5KV and keep 10 minutes can not been broken down. Insulation between the core and the shield should be able to withstand the DC 90 KV and keep 15 minutes can not been broken down. The plug body should be able to withstand not less than 1000 times fallen off experiments with no damage. The surface of each plating should be clean and bright. The DC resistance of the conductor and ground cable not more than 11.4 + 5%Ω/m. The insulation resistance of the insulation core wire not less than 1000MΩ•Km. The cable and each part should meet Rohs 3.0 relative requirement. Brass is below 0.1wt. The cable and each part should meet Reach relative requirement.
Packaging & Delivery
Packing for high voltage cable Waterproof carton Packing size: 51cm*50cm*14cm Gross Weight: 12KG; Net Weight: 10KG Portweifang,qingdao,shanghai,beijing Picture Example:
Lead Time: 
Continued Table1 
